How To Clean Scan And Cut Mat

That mat can be a little pesky! This post will embrace how to clean your mat so that information technology stays sticky and then embrace how to restick your Scan North Cut mat once the sticky is lost.

Unfortunately, I had only had my mat for almost iii weeks when I was having trouble with the level of stickiness it had left. Keeping the materials on the mat while cutting was starting to be a huge event. The second the materials movement the projection is wrecked! This is and then disappointing. (and tin can be plush)

While Brother recommends purchasing a new mat…. purchasing a new one every few weeks is oft not an pick.

It certainly wasn't for me at all!

The manner I now combat this issue is in a few steps, depending on the level of the problem (or yous might say … stickiness).

Cleaning Your Mat

The starting time thing I work on is cleaning the mat with alcohol-complimentary wipes… you know… baby wipes.

After each use would be ideal and recommended. Notwithstanding, I am oftentimes then busy with my project and intent on getting it finished, I end upwards doing it merely before I start my next project. This is non great, as it delays the commencement of the projection.

Masking Tape

My next 'go-to' is masking tape. The kind yous use when painting so that you don't get pigment everywhere. It comes in dissimilar colors and I accept blue and cream. The color you lot accept makes NO difference at all. I would honey some pinkish rolls LOL

If you feel like your card-stock or vinyl are not attaching to the mat quite equally well as you would like then mask them down. I have tried sticky tape besides however due to the fact it is articulate I have had a few issues with information technology.

Namely: Tin't see when you have left it on the mat and much easier for it to get stuck in the automobile and stuck on the scanner. It likewise sticks to bill of fare-stock a bit more than I would like.

The masking record is easy to see and you will have less problem getting it off your card-stock and your mat.

Time To Restick Your Mat

Once all the other 'fixes' no longer work then it is time to head to the Zig glue and restick your Scan Northward Cut mat. This is a actually easy procedure and basically consists of removing the erstwhile glue and putting the 2 mode Zig glue on.

Piece of work on a department at a time and ensure that you do Non get it over the edge. The glue goes on blue and dries clear. Working in sections makes it easier to keep track of where yous accept placed the glue.

Allow your mat to dry completely.

Don't be too heavy-handed applying the gum as it will brand the mat too mucilaginous.

Notation: Exist mindful of not damaging or gluing the registration marks. (Both the raised ones and the black marking on your mat.)

Once the Zig glue has dried and yous have managed to restick your Browse Northward Cut mat!

Piece of cake every bit that!

Mat besides sticky?

What do you practise if your mat ends upward a little also gummy? Once it is dry, just dab it with a tea towel or lint-gratuitous cloth. This will reduce the stickiness.

If you are notwithstanding concerned, practise a small test expanse with the textile you are most to use on the mat.

While my mat looks a petty tired and well-loved, I am amazed that it has lasted every bit long as it has. At some phase I will need to purchase a new mat…. but not yet 🙂

Happy creating!

Would y'all like to get more out of your Scan N Cut?

Have y'all used your scan feature on your Browse Due north Cut?

What near where to await to prepare upwards wifi or calibration.

Enroll in my Brother Scan Northward Cut Basics class for Gratuitous.

Express fourth dimension only

Are yous just starting out or perhaps a little intimidated past your Scan Due north Cut? This course is for you!

This newly created video form is a stride-by-step introduction to using your Browse Northward Cutting. It has been designed especially for Yous!

The course will evidence you how to use your Scan N Cutting car from the very kickoff with minimal fuss and bother. This volition allow you to create cute, cuttable designs.

Available for enrollment gratuitous for a express time only!

These butterflies have been cut from a free image downloaded from Pixabay.com. The image was printed out and then scanned. Another option is to use your stamps.

You tin can see the variations available to you using the Browse feature of your Scan Northward Cut. The scanning feature is what makes this cutting motorcar unique!

Join Me

Join me in the facebook group Scan N Cut ~ Let'south Create With Sue.

AND similar my facebook page Create With Sue

PLEASE SHARE
Pivot these to Pinterest

Source: https://www.createwithsue.com/restick-your-scan-n-cut-mat/

Posted by: granttolly1993.blogspot.com

Share this post